| Products >> Orind
Products India >> Basic Refractories & Sleeves |
| |
| Basic & Special Basic Bricks |
| |
|
Magnesite Bricks are used for lining of various furnaces, safety
lining of BOF converters / Ladles, working lining of hot metal mixers.
Magne-G are dense Magnesite bricks with high RUL. Super Magne-B
are low iron magnesite bricks for glass tank regenerator checkers
and EAF below slag lines, safety lining of LD converter. Magal is
Magnesia alumina bricks specially developed for burning zone of
white cement Rotary kiln and vacuum induction furnaces. Conventional
Magnesite and Magchrome bricks for EAF sidewall and other general
applications. Magnecem, a special product for burning zone of cement
rotary kiln. ORINKRAL, an import substitute and superior performer
for cement kiln burning zone. |
| |
| Basic Bricks |
| BRAND |
MgO
(%) |
Cr2O3
(%) |
SiO2
(%) |
P.C.E.
Orton Cone |
A.P
(%) |
B.D.
(gm/cc) |
C.C.S.
(Kg/cm2) |
R.U.L.
Ta (°C) |
| |
Min. |
Min. |
Max. |
Min. |
Max. |
Min. |
Min. |
Min. |
| MAGNE-B-I |
91 |
- |
4.0 |
38 |
18 |
2.85 |
600 |
1600 |
| MAGNE-B-II |
85 |
- |
5.5 |
38 |
22 |
2.80 |
350 |
1550 |
| MAGNE-B-III |
62 |
- |
30.0 |
38 |
20 |
2.70 |
400 |
1560 |
| MAGNE-C |
85 |
- |
5.5 |
38 |
14 |
2.85 |
400 |
1550 |
| MAGNE CHROME-B |
60 |
15 |
- |
38 |
25 |
2.95 |
200 |
1550 |
| MAGNE CHROME-C |
60 |
15 |
- |
38 |
15 |
3.00 |
400 |
1530 |
| CHROME MAGNE-B |
35 |
25 |
- |
38 |
25 |
2.95 |
200 |
1600 |
| CHROME MAGNE-C |
35 |
25 |
- |
38 |
15 |
3.00 |
350 |
1550 |
| CHROMEL-D |
- |
45 |
- |
38 |
20 |
3.35 |
500 |
1550 |
|
| |
|
Special Basic Bricks |
| |
| Brand |
MgO
(%) |
Fe2O3
(%) |
Cr2O3
(%) |
SiO2
(%) |
CaO
(%) |
Al2O3
(%) |
P.C.E.
Orton Cone |
A.P.
(%) |
B.D.
(gm/cc) |
C.C.S.
(Kg/cm2) |
R.U.L.
Ta (°C) |
PLC
(%) 1600°C/ 2 hrs |
| |
Min. |
Max. |
Min. |
Max. |
Max. |
Max |
Min. |
Max. |
Min. |
Min. |
Min. |
Max. |
| MAGNE-G |
90 |
1.0 |
- |
3.0 |
1.0 |
- |
38 |
22 |
2.85 |
400 |
1600 |
±1.5 |
| SUPER MAGNE-B |
95 |
0.8 |
- |
1.0 |
2.5 |
- |
38 |
20 |
2.90 |
450 |
1650 |
±0.8 |
| SUPER MAGNE-G |
97 |
0.5 |
- |
1.0 |
2.0 |
- |
42 |
18 |
2.95 |
600 |
1700 |
±0.5 |
| MAGAL-I |
85 |
1.0 |
- |
- |
- |
6.0 |
38 |
22 |
2.85 |
500 |
1650 |
±1.0 |
| MAGAL-II |
80 |
- |
- |
- |
- |
10.0 |
38 |
22 |
2.85 |
400 |
1650 |
±1.5 |
| MAGAL-III |
90 |
- |
- |
- |
- |
4.0 |
38 |
20 |
2.90 |
500 |
1650 |
±1.0 |
| MAGAL-IV |
70 |
2.5 |
- |
- |
- |
12.0 |
38 |
23 |
2.85 |
350 |
1600 |
±2.5 |
| MAGNECEM |
67 |
- |
10 |
4.0 |
- |
- |
38 |
23 |
2.80 |
350 |
1550 |
-2.0 |
| ORINKRAL |
80 |
- |
9 |
1.0 |
- |
- |
38 |
21 |
- |
400 |
1600 |
- |
| ZIRMAG |
75 |
0.8 |
ZrO2=13% Min. |
- |
- |
0.3 |
- |
18 |
3.00 |
700 |
1550 |
- |
|
| |
| DIRECT BONDED & DENSE MAGNESIA CHROME BRICKS |
| |
|
Direct Bonded Magnesia Chrome & Dense Mag-chrome; high strength
refractories ensure longer campaign life. Supreme D, E, 60, 70 and
80 for burning zone of Rotary kiln, secondary steel making vessel
applications, platinum, nickel and copper converters. Special dense
magnesite chrome bricks for secondary steel making ladles and other
applications. |
| |
| |
|
Cold Face Insulating Products |
| |
|
Normal quality products for cold face applications in various furnaces
like soaking pits, regenerator walls, annealing furnaces, BF stoves,
heat treatment furnaces etc. Special foam insulation products for
back up lining of aluminium pot furnaces and similar applications
upto 850°C. Exhibits very low thermal conductivity. |
|
Direct Bonded Magnesia Chrome Bricks |
| BRAND |
MgO
(%) |
Cr2O3
(%) |
A.P.
(%) |
B.D.
(gm/cc) |
C.C.S.
(Kg/cm2) |
R.U.L.
Ta (°C) |
PLC
at 1700°C/ 2hr. (%) |
HMOR at 1400°C/ 1 hr. (Kg/cm2) |
| |
Min. |
Min. |
Max. |
Min. |
Min. |
Min. |
Max. |
Min |
| SUPREME-D |
58 |
18 |
18 |
3.00 |
500 |
1680 |
0.5 |
55 |
| SUPREME-E |
62 |
15 |
20 |
2.95 |
450 |
1640 |
0.8 |
30 |
| SUPREME-60 |
62 |
15 |
18 |
3.00 |
500 |
1680 |
0.5 |
45 |
| SUPREME-70 |
74 |
10 |
19 |
3.00 |
450 |
1600 |
0.5 |
- |
| SUPREME-80 |
83 |
7.5 |
19 |
2.95 |
450 |
1650 |
0.5(at 1600°C/2hrs) |
- |
| SUPREME-156 |
62 |
18 |
18 |
3.10 |
400 |
1700 |
+0.3(at 1600°C/2hrs) |
- |
| SUPREME-155 |
45 |
25 |
18 |
3.15 |
350 |
1700 |
+0.3(at 1600°C/2hrs) |
- |
| OFDMK-16B |
62 |
14 |
19 |
3.05 |
400 |
1750 |
+0.3(at 1600°C/2hrs) |
- |
|
| |
|
Dense Magnesia Chrome Bricks |
| |
| Brand |
MgO
(%) |
Cr2O3
(%) |
P.C.E.
Orton Cone |
A.P.
(%) |
B.D.
(gm/cc) |
C.C.S.
(Kg/cm2) |
R.U.L.
Ta (°C) |
PLC
at 1600°C
/2 hrs |
| |
Min. |
Min. |
Min. |
Max. |
Min. |
Min. |
Min. |
Max. |
| DENMAG CHROME-I |
65 |
13 |
38 |
20 |
2.90 |
400 |
1620 |
0.5 |
| DENMAG CHROME-II |
72 |
9 |
38 |
19 |
2.95 |
450 |
1620 |
0.5 |
| DENMAG CHROME-III |
78 |
7 |
38 |
18 |
2.95 |
500 |
1620 |
0.5 |
|
| |
| SLEEVES, NOZZLES AND WELL BLOCKS |
| |
|
Refractory products in High Alumina, Zircon and Magnesite qualities
for Sleeves, Nozzles and Well blocks. |
|
Brand |
Al2O3
(%) |
Fe2O3 (%) |
ZrO2
(%) |
MgO
(%) |
A.P.
(%) |
B.D. (gm/cc) |
C.C.S. (Kg/cm2) |
P.L.C. at 1500°C
(%) |
|
|
Min. |
Max. |
Min. |
Min. |
Max. |
Min. |
Min. |
Max. |
|
ORIND AL-50 |
50 |
2.5 |
- |
- |
22-25 |
2.30 |
350 |
+2.0 |
|
ORIND AL-60 |
60 |
3.0 |
- |
- |
22-25 |
2.45 |
350 |
+2.5 |
|
ORIND AL-70 |
70 |
3.5 |
- |
- |
22-25 |
2.50 |
350 |
+2.5 |
|
KOROND AL-XD |
90 |
0.5 |
- |
- |
22-25 |
2.80 |
500 |
±0.3 |
|
ZIRCON |
- |
- |
63 |
- |
22-25 |
3.50 |
- |
- |
|
MAGNE-C |
- |
- |
- |
85 |
20-23 |
2.80 |
250 |
±1.0 at
1600°C |
|
| |
